12-sep-2007, 19:21
|
#11 | |
|
Marciano
|
Respondiendo Jerec y gracias :D
Quote:
Code:
Sep 10 17:35:34 madre dhcdbd: Started up. Sep 10 17:35:35 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason Sep 10 17:35:35 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason Sep 10 17:35:36 madre kernel: [ 65.986618] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. Sep 10 17:35:36 madre kernel: [ 65.987056] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode Sep 10 17:35:36 madre kernel: [ 65.987420] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode Sep 10 17:35:36 madre kernel: [ 66.250324] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to specify physical device; fix it! Sep 10 17:35:36 madre kernel: [ 66.252446] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] forgot to specify physical device; fix it! Sep 10 17:35:36 madre kernel: [ 66.254416] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] forgot to specify physical device; fix it! Sep 10 17:35:36 madre kernel: [ 66.850499] ppdev: user-space parallel port driver Sep 10 17:35:37 madre hpiod: 1.7.3 accepting connections at 2208... Sep 10 17:35:37 madre kernel: [ 67.626446] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Sep 10 17:35:37 madre kernel: [ 67.626451] apm: overridden by ACPI. Sep 10 17:35:37 madre kernel: [ 67.787758] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 10 17:35:37 madre kernel: [ 67.873954] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Sep 10 17:35:38 madre kernel: [ 67.890735] NFSD: starting 90-second grace period Sep 10 17:35:40 madre kernel: [ 69.938032] Bluetooth: L2CAP ver 2.8 Sep 10 17:35:40 madre kernel: [ 69.938036] Bluetooth: L2CAP socket layer initialized Sep 10 17:35:40 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name Sep 10 17:35:40 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.domain_name Sep 10 17:35:40 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain Sep 10 17:35:40 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers Sep 10 17:35:40 madre kernel: [ 70.321919] Bluetooth: RFCOMM socket layer initialized Sep 10 17:35:40 madre kernel: [ 70.321932] Bluetooth: RFCOMM TTY layer initialized Sep 10 17:35:40 madre kernel: [ 70.321933] Bluetooth: RFCOMM ver 1.8 Sep 10 17:36:26 madre gconfd (naragol-5765): comenzando (versión 2.18.0.1), pid 5765 usuario «naragol» Sep 10 17:36:26 madre gconfd (naragol-5765): Se resolvió la dirección «xml:readonly:/etc/gconf/gconf.xml.mandatory» a una fuente de configuración de sólo lectura en la posición 0 Sep 10 17:36:26 madre gconfd (naragol-5765): Se resolvió la dirección «xml:readwrite:/home/naragol/.gconf» a una fuente de configuración escribible en la posición 1 Sep 10 17:36:26 madre gconfd (naragol-5765): Se resolvió la dirección «xml:readonly:/etc/gconf/gconf.xml.defaults» a una fuente de configuración de sólo lectura en la posición 2 Sep 10 17:36:26 madre gconfd (naragol-5765): Se resolvió la dirección «xml:readonly:/var/lib/gconf/debian.defaults» a una fuente de configuración de sólo lectura en la posición 3 Sep 10 17:36:26 madre gconfd (naragol-5765): Se resolvió la dirección «xml:readonly:/var/lib/gconf/defaults» a una fuente de configuración de sólo lectura en la posición 4 Sep 10 17:36:33 madre gconfd (naragol-5765): Se resolvió la dirección «xml:readwrite:/home/naragol/.gconf» a una fuente de configuración escribible en la posición 0 Sep 10 17:51:53 madre gconfd (naragol-5765): Failed to send buffer Sep 10 18:00:47 madre syslogd 1.4.1#20ubuntu4: restart. Por lo demas no responde nada, ni puedo cambiar de consola ni puedo matar las X ni nada  .EDITO. Pues me lo acaba de hacer Code:
Sep 12 17:18:55 madre -- MARK -- Sep 12 17:38:56 madre -- MARK -- Sep 12 17:58:56 madre -- MARK -- Sep 12 18:18:56 madre -- MARK -- Sep 12 18:38:58 madre -- MARK -- Sep 12 18:42:01 madre syslogd 1.4.1#20ubuntu4: restart. Sep 12 18:42:01 madre kernel: Inspecting /boot/System.map-2.6.20-16-generic Sep 12 18:42:01 madre kernel: Loaded 24980 symbols from /boot/System.map-2.6.20-16-generic. Sep 12 18:42:01 madre kernel: Symbols match kernel version 2.6.20. Sep 12 18:42:01 madre kernel: No module symbols loaded - kernel modules not enabled. Sep 12 18:42:01 madre kernel: [ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007 (Ubuntu 2.6.20-16.31-generic) Sep 12 18:42:01 madre kernel: [ 0.000000] BIOS-provided physical RAM map: Sep 12 18:42:01 madre kernel: [ 0.000000] sanitize start Sep 12 18:42:01 madre kernel: [ 0.000000] sanitize end Sep 12 18:42:01 madre kernel: [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 Sep 12 18:42:01 madre kernel: [ 0.000000] copy_e820_map() type is E820_RAM Sep 12 18:42:01 madre kernel: [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 Sep 12 18:42:01 madre kernel: [ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 Sep 12 18:42:01 madre kernel: [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fe30000 end: 000000003ff30000 type: 1 Sep 12 18:42:01 madre kernel: [ 0.000000] copy_e820_map() type is E820_RAM Sep 12 18:42:01 madre kernel: [ 0.000000] copy_e820_map() start: 000000003ff30000 size: 0000000000010000 end: 000000003ff40000 type: 3 Sep 12 18:42:01 madre kernel: [ 0.000000] copy_e820_map() start: 000000003ff40000 size: 00000000000b0000 end: 000000003fff0000 type: 4 Sep 12 18:42:01 madre kernel: [ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000010000 end: 0000000040000000 type: 2 Sep 12 18:42:01 madre kernel: [ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 Sep 12 18:42:01 madre kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Sep 12 18:42:01 madre kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Sep 12 18:42:01 madre kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Sep 12 18:42:01 madre kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) Sep 12 18:42:01 madre kernel: [ 0.000000] BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) Sep 12 18:42:01 madre kernel: [ 0.000000] BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) Sep 12 18:42:01 madre kernel: [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) Sep 12 18:42:01 madre kernel: [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Sep 12 18:42:01 madre kernel: [ 0.000000] 127MB HIGHMEM available. Sep 12 18:42:01 madre kernel: [ 0.000000] 896MB LOWMEM available. Sep 12 18:42:01 madre kernel: [ 0.000000] found SMP MP-table at 000ff780 Sep 12 18:42:01 madre kernel: [ 0.000000] Zone PFN ranges: Sep 12 18:42:01 madre kernel: [ 0.000000] DMA 0 -> 4096 Sep 12 18:42:01 madre kernel: [ 0.000000] Normal 4096 -> 229376 Sep 12 18:42:01 madre kernel: [ 0.000000] HighMem 229376 -> 261936 Sep 12 18:42:01 madre kernel: [ 0.000000] early_node_map[1] active PFN ranges Sep 12 18:42:01 madre kernel: [ 0.000000] 0: 0 -> 261936 Sep 12 18:42:01 madre kernel: [ 0.000000] DMI 2.3 present. Sep 12 18:42:01 madre kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Sep 12 18:42:01 madre kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Sep 12 18:42:01 madre kernel: [ 0.000000] Processor #0 15:12 APIC version 16 Sep 12 18:42:01 madre kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Sep 12 18:42:01 madre kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 Sep 12 18:42:01 madre kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 12 18:42:01 madre kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs Sep 12 18:42:01 madre kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Sep 12 18:42:01 madre kernel: [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000) Sep 12 18:42:01 madre kernel: [ 0.000000] Detected 2203.072 MHz processor. Sep 12 18:42:01 madre kernel: [ 33.799592] Built 1 zonelists. Total pages: 259890 Sep 12 18:42:01 madre kernel: [ 33.799595] Kernel command line: root=UUID=72bc5b4c-3259-4c4e-8b7b-bb36ecccd123 ro quiet splash locale=es_ES Sep 12 18:42:01 madre kernel: [ 33.799720] Enabling fast FPU save and restore... done. Sep 12 18:42:01 madre kernel: [ 33.799722] Enabling unmasked SIMD FPU exception support... done. Sep 12 18:42:01 madre kernel: [ 33.799729] Initializing CPU#0 Sep 12 18:42:01 madre kernel: [ 33.799797] PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 12 18:42:01 madre kernel: [ 33.801288] Console: colour VGA+ 80x25 Sep 12 18:42:01 madre kernel: [ 33.801660] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 12 18:42:01 madre kernel: [ 33.802036] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 12 18:42:01 madre kernel: [ 33.819389] Memory: 1027552k/1047744k available (1993k kernel code, 19476k reserved, 900k data, 328k init, 130240k highmem) Sep 12 18:42:01 madre kernel: [ 33.819398] virtual kernel memory layout: Sep 12 18:42:01 madre kernel: [ 33.819399] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) Sep 12 18:42:01 madre kernel: [ 33.819400] pkmap : 0xff800000 - 0xffc00000 (4096 kB) Sep 12 18:42:01 madre kernel: [ 33.819401] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) Sep 12 18:42:01 madre kernel: [ 33.819402] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) Sep 12 18:42:01 madre kernel: [ 33.819403] .init : 0xc03d9000 - 0xc042b000 ( 328 kB) Sep 12 18:42:01 madre kernel: [ 33.819404] .data : 0xc02f2434 - 0xc03d36d4 ( 900 kB) Sep 12 18:42:01 madre kernel: [ 33.819406] .text : 0xc0100000 - 0xc02f2434 (1993 kB) Sep 12 18:42:01 madre kernel: [ 33.819408] Checking if this processor honours the WP bit even in supervisor mode... Ok. Sep 12 18:42:01 madre kernel: [ 33.895635] Calibrating delay using timer specific routine.. 4410.92 BogoMIPS (lpj=8821852) Sep 12 18:42:01 madre kernel: [ 33.895669] Security Framework v1.0.0 initialized Sep 12 18:42:01 madre kernel: [ 33.895677] SELinux: Disabled at boot. Sep 12 18:42:01 madre kernel: [ 33.895689] Mount-cache hash table entries: 512 Sep 12 18:42:01 madre kernel: [ 33.895811] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 12 18:42:01 madre kernel: [ 33.895813] CPU: L2 Cache: 512K (64 bytes/line) Sep 12 18:42:01 madre kernel: [ 33.895825] Compat vDSO mapped to ffffe000. Sep 12 18:42:01 madre kernel: [ 33.895829] Remapping vsyscall page to ffffe000 Sep 12 18:42:01 madre kernel: [ 33.895837] Checking 'hlt' instruction... OK. Sep 12 18:42:01 madre kernel: [ 33.911710] SMP alternatives: switching to UP code Sep 12 18:42:01 madre kernel: [ 33.911876] Freeing SMP alternatives: 11k freed Sep 12 18:42:01 madre kernel: [ 33.912043] Early unpacking initramfs... done Sep 12 18:42:01 madre kernel: [ 34.166580] ACPI: Core revision 20060707 Sep 12 18:42:01 madre kernel: [ 34.166983] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. Sep 12 18:42:01 madre kernel: [ 34.168421] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00 Sep 12 18:42:01 madre kernel: [ 34.168438] Total of 1 processors activated (4410.92 BogoMIPS). Sep 12 18:42:01 madre kernel: [ 34.168939] ENABLING IO-APIC IRQs Sep 12 18:42:01 madre kernel: [ 34.169255] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 Sep 12 18:42:01 madre kernel: [ 34.314917] Brought up 1 CPUs Sep 12 18:42:01 madre kernel: [ 34.315106] Booting paravirtualized kernel on bare hardware Sep 12 18:42:01 madre kernel: [ 34.315195] Time: 16:41:25 Date: 08/12/107 Sep 12 18:42:01 madre kernel: [ 34.315218] NET: Registered protocol family 16 Sep 12 18:42:01 madre kernel: [ 34.315278] EISA bus registered Sep 12 18:42:01 madre kernel: [ 34.315281] ACPI: bus type pci registered Sep 12 18:42:01 madre kernel: [ 34.315891] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 Sep 12 18:42:01 madre kernel: [ 34.315893] PCI: Using configuration type 1 Sep 12 18:42:01 madre kernel: [ 34.315894] Setting up standard PCI resources Sep 12 18:42:01 madre kernel: [ 34.325768] ACPI: Interpreter enabled Sep 12 18:42:01 madre kernel: [ 34.325770] ACPI: Using IOAPIC for interrupt routing Sep 12 18:42:01 madre kernel: [ 34.326580] ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 12 18:42:01 madre kernel: [ 34.327319] PCI: enabled onboard AC97/MC97 devices Sep 12 18:42:01 madre kernel: [ 34.338911] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) Sep 12 18:42:01 madre kernel: [ 34.339076] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 14 15) Sep 12 18:42:01 madre kernel: [ 34.339237] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 14 15) Sep 12 18:42:01 madre kernel: [ 34.339397] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 14 15) Sep 12 18:42:01 madre kernel: [ 34.339561] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. Sep 12 18:42:01 madre kernel: [ 34.339723] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. Sep 12 18:42:01 madre kernel: [ 34.339884] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. Sep 12 18:42:01 madre kernel: [ 34.340046] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. Sep 12 18:42:01 madre kernel: [ 34.340124] Linux Plug and Play Support v0.97 (c) Adam Belay Sep 12 18:42:01 madre kernel: [ 34.340134] pnp: PnP ACPI init Sep 12 18:42:01 madre kernel: [ 34.343275] pnp: PnP ACPI: found 14 devices Sep 12 18:42:01 madre kernel: [ 34.343278] PnPBIOS: Disabled by ACPI PNP Sep 12 18:42:01 madre kernel: [ 34.343315] PCI: Using ACPI for IRQ routing Sep 12 18:42:01 madre kernel: [ 34.343318] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Sep 12 18:42:01 madre kernel: [ 34.347130] NET: Registered protocol family 8 Sep 12 18:42:01 madre kernel: [ 34.347132] NET: Registered protocol family 20 Sep 12 18:42:01 madre kernel: [ 34.347721] PCI: Bridge: 0000:00:01.0 Sep 12 18:42:01 madre kernel: [ 34.347722] IO window: disabled. Sep 12 18:42:01 madre kernel: [ 34.347726] MEM window: faf00000-fd0fffff Sep 12 18:42:01 madre kernel: [ 34.347729] PREFETCH window: d2a00000-f29fffff Sep 12 18:42:01 madre kernel: [ 34.347772] NET: Registered protocol family 2 Sep 12 18:42:01 madre kernel: [ 34.386820] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 12 18:42:01 madre kernel: [ 34.386966] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Sep 12 18:42:01 madre kernel: [ 34.387747] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Sep 12 18:42:01 madre kernel: [ 34.388143] TCP: Hash tables configured (established 131072 bind 65536) Sep 12 18:42:01 madre kernel: [ 34.388145] TCP reno registered Sep 12 18:42:01 madre kernel: [ 34.398839] checking if image is initramfs... it is Sep 12 18:42:01 madre kernel: [ 34.899688] Freeing initrd memory: 6782k freed Sep 12 18:42:01 madre kernel: [ 34.900009] audit: initializing netlink socket (disabled) Sep 12 18:42:01 madre kernel: [ 34.900019] audit(1189615285.180:1): initialized Sep 12 18:42:01 madre kernel: [ 34.900067] highmem bounce pool size: 64 pages Sep 12 18:42:01 madre kernel: [ 34.900126] VFS: Disk quotas dquot_6.5.1 Sep 12 18:42:01 madre kernel: [ 34.900142] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 12 18:42:01 madre kernel: [ 34.900186] io scheduler noop registered Sep 12 18:42:01 madre kernel: [ 34.900188] io scheduler anticipatory registered Sep 12 18:42:01 madre kernel: [ 34.900190] io scheduler deadline registered Sep 12 18:42:01 madre kernel: [ 34.900200] io scheduler cfq registered (default) Sep 12 18:42:01 madre kernel: [ 34.929933] isapnp: Scanning for PnP cards... Sep 12 18:42:01 madre kernel: [ 35.283102] isapnp: No Plug & Play device found Sep 12 18:42:01 madre kernel: [ 35.298887] Real Time Clock Driver v1.12ac Sep 12 18:42:01 madre kernel: [ 35.298920] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Sep 12 18:42:01 madre kernel: [ 35.299011] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 12 18:42:01 madre kernel: [ 35.299115] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Sep 12 18:42:01 madre kernel: [ 35.299482] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Sep 12 18:42:01 madre kernel: [ 35.299637] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 12 18:42:01 madre kernel: [ 35.299755] mice: PS/2 mouse device common for all mice Sep 12 18:42:01 madre kernel: [ 35.300116] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Sep 12 18:42:01 madre kernel: [ 35.300282] input: Macintosh mouse button emulation as /class/input/input0 Sep 12 18:42:01 madre kernel: [ 35.300304] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 12 18:42:01 madre kernel: [ 35.300307] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 12 18:42:01 madre kernel: [ 35.300531] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Sep 12 18:42:01 madre kernel: [ 35.300889] serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 12 18:42:01 madre kernel: [ 35.300892] serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 12 18:42:01 madre kernel: [ 35.300969] EISA: Probing bus 0 at eisa.0 Sep 12 18:42:01 madre kernel: [ 35.300976] Cannot allocate resource for EISA slot 1 Sep 12 18:42:01 madre kernel: [ 35.301000] EISA: Detected 0 cards. Sep 12 18:42:01 madre kernel: [ 35.331090] TCP cubic registered Sep 12 18:42:01 madre kernel: [ 35.331099] NET: Registered protocol family 1 Sep 12 18:42:01 madre kernel: [ 35.331116] Using IPI No-Shortcut mode Sep 12 18:42:01 madre kernel: [ 35.331169] ACPI: (supports S0 S1 S3 S4 S5) Sep 12 18:42:01 madre kernel: [ 35.331201] Magic number: 7:748:691 Sep 12 18:42:01 madre kernel: [ 35.331528] Freeing unused kernel memory: 328k freed Sep 12 18:42:01 madre kernel: [ 35.333050] Time: tsc clocksource has been installed. Sep 12 18:42:01 madre kernel: [ 35.343136] input: AT Translated Set 2 keyboard as /class/input/input1 Sep 12 18:42:01 madre kernel: [ 36.544355] Capability LSM initialized Sep 12 18:42:01 madre kernel: [ 37.010251] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 Sep 12 18:42:01 madre kernel: [ 37.070579] SCSI subsystem initialized Sep 12 18:42:01 madre kernel: [ 37.086587] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fdd00000-fdd007ff] Max Packet=[2048] IR/IT contexts=[4/8] Sep 12 18:42:01 madre kernel: [ 37.092564] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 17 Sep 12 18:42:01 madre kernel: [ 37.092576] sata_promise PATA port found Sep 12 18:42:01 madre kernel: [ 37.133889] ata1: SATA max UDMA/133 cmd 0xf8874200 ctl 0xf8874238 bmdma 0x00000000 irq 17 Sep 12 18:42:01 madre kernel: [ 37.133912] ata2: SATA max UDMA/133 cmd 0xf8874280 ctl 0xf88742b8 bmdma 0x00000000 irq 17 Sep 12 18:42:01 madre kernel: [ 37.142827] usbcore: registered new interface driver usbfs Sep 12 18:42:01 madre kernel: [ 37.142846] usbcore: registered new interface driver hub Sep 12 18:42:01 madre kernel: [ 37.142862] usbcore: registered new device driver usb Sep 12 18:42:01 madre kernel: [ 37.143473] USB Universal Host Controller Interface driver v3.0 Sep 12 18:42:01 madre kernel: [ 37.145752] ata3: PATA max UDMA/133 cmd 0xf8874300 ctl 0xf8874338 bmdma 0x00000000 irq 17 Sep 12 18:42:01 madre kernel: [ 37.145770] scsi0 : sata_promise Sep 12 18:42:01 madre kernel: [ 37.280284] Floppy drive(s): fd0 is 1.44M Sep 12 18:42:01 madre kernel: [ 37.320793] FDC 0 is a post-1991 82077 Sep 12 18:42:01 madre kernel: [ 37.461136] ata1: SATA link down (SStatus 0 SControl 0) Sep 12 18:42:01 madre kernel: [ 37.461154] scsi1 : sata_promise Sep 12 18:42:01 madre kernel: [ 37.772563] ata2: SATA link down (SStatus 0 SControl 300) Sep 12 18:42:01 madre kernel: [ 37.772572] scsi2 : sata_promise Sep 12 18:42:01 madre kernel: [ 37.933061] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18 Sep 12 18:42:01 madre kernel: [ 37.933093] skge 1.9 addr 0xfdb00000 irq 18 chip Yukon-Lite rev 7 Sep 12 18:42:01 madre kernel: [ 37.933294] skge eth0: addr 00:11:2f:52:13:5c Sep 12 18:42:01 madre kernel: [ 37.933365] ACPI: PCI Interrupt 0000:00:0f.0[b] -> GSI 20 (level, low) -> IRQ 19 Sep 12 18:42:01 madre kernel: [ 37.933381] sata_via 0000:00:0f.0: routed to hard irq line 5 Sep 12 18:42:01 madre kernel: [ 37.933417] ata4: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001c802 bmdma 0x0001b800 irq 19 Sep 12 18:42:01 madre kernel: [ 37.933438] ata5: SATA max UDMA/133 cmd 0x0001c400 ctl 0x0001c002 bmdma 0x0001b808 irq 19 Sep 12 18:42:01 madre kernel: [ 37.933451] scsi3 : sata_via Sep 12 18:42:01 madre kernel: [ 38.139890] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Sep 12 18:42:01 madre kernel: [ 38.306186] ATA: abnormal status 0x7F on port 0x0001d007 Sep 12 18:42:01 madre kernel: [ 38.316790] ATA: abnormal status 0x7F on port 0x0001d007 Sep 12 18:42:01 madre kernel: [ 38.327914] ata4.00: ata_hpa_resize 1: sectors = 240121728, hpa_sectors = 240121728 Sep 12 18:42:01 madre kernel: [ 38.327917] ata4.00: ATA-7: Maxtor 6Y120M0, YAR51HW0, max UDMA/133 Sep 12 18:42:01 madre kernel: [ 38.327919] ata4.00: 240121728 sectors, multi 16: LBA Sep 12 18:42:01 madre kernel: [ 38.339872] ata4.00: ata_hpa_resize 1: sectors = 240121728, hpa_sectors = 240121728 Sep 12 18:42:01 madre kernel: [ 38.339875] ata4.00: configured for UDMA/133 Sep 12 18:42:01 madre kernel: [ 38.339883] scsi4 : sata_via Sep 12 18:42:01 madre kernel: [ 38.547144] ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300) Sep 12 18:42:01 madre kernel: [ 38.557711] ATA: abnormal status 0x7F on port 0x0001c407 Sep 12 18:42:01 madre kernel: [ 38.558473] scsi 3:0:0:0: Direct-Access ATA Maxtor 6Y120M0 YAR5 PQ: 0 ANSI: 5 Sep 12 18:42:01 madre kernel: [ 38.561460] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 Sep 12 18:42:01 madre kernel: [ 38.561477] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 19 Sep 12 18:42:01 madre kernel: [ 38.561487] VP_IDE: chipset revision 6 Sep 12 18:42:01 madre kernel: [ 38.561489] VP_IDE: not 100%% native mode: will probe irqs later Sep 12 18:42:01 madre kernel: [ 38.561499] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 Sep 12 18:42:01 madre kernel: [ 38.561505] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio Sep 12 18:42:01 madre kernel: [ 38.561516] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA Sep 12 18:42:01 madre kernel: [ 38.576394] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) Sep 12 18:42:01 madre kernel: [ 38.576405] sda: Write Protect is off Sep 12 18:42:01 madre kernel: [ 38.576418] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 12 18:42:01 madre kernel: [ 38.576453] SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) Sep 12 18:42:01 madre kernel: [ 38.576459] sda: Write Protect is off Sep 12 18:42:01 madre kernel: [ 38.576469] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 12 18:42:01 madre kernel: [ 38.576472] sda: sda1 Sep 12 18:42:01 madre kernel: [ 38.599172] sd 3:0:0:0: Attached scsi disk sda Sep 12 18:42:01 madre kernel: [ 38.602881] sd 3:0:0:0: Attached scsi generic sg0 type 0 Sep 12 18:42:01 madre kernel: [ 38.978453] hda: ST380011A, ATA DISK drive Sep 12 18:42:01 madre kernel: [ 39.653636] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 12 18:42:01 madre kernel: [ 40.523623] hdc: _NEC DV-5700B, ATAPI CD/DVD-ROM drive Sep 12 18:42:01 madre kernel: [ 41.306195] hdd: HL-DT-STDVDRRW GWA-4161B, ATAPI CD/DVD-ROM drive Sep 12 18:42:01 madre kernel: [ 41.363161] ide1 at 0x170-0x177,0x376 on irq 15 Sep 12 18:42:01 madre kernel: [ 41.371087] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 20 Sep 12 18:42:01 madre kernel: [ 41.371098] uhci_hcd 0000:00:10.0: UHCI Host Controller Sep 12 18:42:01 madre kernel: [ 41.371269] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 Sep 12 18:42:01 madre kernel: [ 41.371295] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000cc00 Sep 12 18:42:01 madre kernel: [ 41.371727] usb usb1: configuration #1 chosen from 1 choice Sep 12 18:42:01 madre kernel: [ 41.371864] hub 1-0:1.0: USB hub found Sep 12 18:42:01 madre kernel: [ 41.371871] hub 1-0:1.0: 2 ports detected Sep 12 18:42:01 madre kernel: [ 41.377468] hda: max request size: 512KiB Sep 12 18:42:01 madre kernel: [ 41.389411] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) Sep 12 18:42:01 madre kernel: [ 41.390574] hda: cache flushes supported Sep 12 18:42:01 madre kernel: [ 41.390606] hda: hda1 hda2 < hda5 > hda3 Sep 12 18:42:01 madre kernel: [ 41.436474] hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33) Sep 12 18:42:01 madre kernel: [ 41.436480] Uniform CD-ROM driver Revision: 3.20 Sep 12 18:42:01 madre kernel: [ 41.440656] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Sep 12 18:42:01 madre kernel: [ 41.477895] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 20 Sep 12 18:42:01 madre kernel: [ 41.477906] uhci_hcd 0000:00:10.1: UHCI Host Controller Sep 12 18:42:01 madre kernel: [ 41.477921] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 Sep 12 18:42:01 madre kernel: [ 41.477942] uhci_hcd 0000:00:10.1: irq 20, io base 0x0000dc00 Sep 12 18:42:01 madre kernel: [ 41.478021] usb usb2: configuration #1 chosen from 1 choice Sep 12 18:42:01 madre kernel: [ 41.478041] hub 2-0:1.0: USB hub found Sep 12 18:42:01 madre kernel: [ 41.478048] hub 2-0:1.0: 2 ports detected Sep 12 18:42:01 madre kernel: [ 41.585683] ACPI: PCI Interrupt 0000:00:10.2[b] -> GSI 21 (level, low) -> IRQ 20 Sep 12 18:42:01 madre kernel: [ 41.585695] uhci_hcd 0000:00:10.2: UHCI Host Controller Sep 12 18:42:01 madre kernel: [ 41.585711] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 Sep 12 18:42:01 madre kernel: [ 41.585732] uhci_hcd 0000:00:10.2: irq 20, io base 0x0000ec00 Sep 12 18:42:01 madre kernel: [ 41.585801] usb usb3: configuration #1 chosen from 1 choice Sep 12 18:42:01 madre kernel: [ 41.585825] hub 3-0:1.0: USB hub found Sep 12 18:42:01 madre kernel: [ 41.585830] hub 3-0:1.0: 2 ports detected Sep 12 18:42:01 madre kernel: [ 41.676950] Attempting manual resume Sep 12 18:42:01 madre kernel: [ 41.693475] ACPI: PCI Interrupt 0000:00:10.3[b] -> GSI 21 (level, low) -> IRQ 20 Sep 12 18:42:01 madre kernel: [ 41.693484] uhci_hcd 0000:00:10.3: UHCI Host Controller Sep 12 18:42:01 madre kernel: [ 41.693500] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 Sep 12 18:42:01 madre kernel: [ 41.693522] uhci_hcd 0000:00:10.3: irq 20, io base 0x0000b000 Sep 12 18:42:01 madre kernel: [ 41.693593] usb usb4: configuration #1 chosen from 1 choice Sep 12 18:42:01 madre kernel: [ 41.693614] hub 4-0:1.0: USB hub found Sep 12 18:42:01 madre kernel: [ 41.693625] hub 4-0:1.0: 2 ports detected Sep 12 18:42:01 madre kernel: [ 41.707335] EXT3-fs: INFO: recovery required on readonly filesystem. Sep 12 18:42:01 madre kernel: [ 41.707338] EXT3-fs: write access will be enabled during recovery. Sep 12 18:42:01 madre kernel: [ 41.721336] usb 1-1: new full speed USB device using uhci_hcd and address 2 Sep 12 18:42:01 madre kernel: [ 41.801346] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20 Sep 12 18:42:01 madre kernel: [ 41.801356] ehci_hcd 0000:00:10.4: EHCI Host Controller Sep 12 18:42:01 madre kernel: [ 41.801380] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 Sep 12 18:42:01 madre kernel: [ 41.801413] ehci_hcd 0000:00:10.4: irq 20, io mem 0xfd900000 Sep 12 18:42:01 madre kernel: [ 41.801419] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 12 18:42:01 madre kernel: [ 41.801484] usb usb5: configuration #1 chosen from 1 choice Sep 12 18:42:01 madre kernel: [ 41.801503] hub 5-0:1.0: USB hub found Sep 12 18:42:01 madre kernel: [ 41.801509] hub 5-0:1.0: 8 ports detected Sep 12 18:42:01 madre kernel: [ 44.180836] usb 1-1: new full speed USB device using uhci_hcd and address 4 Sep 12 18:42:01 madre kernel: [ 44.356362] usb 1-1: configuration #1 chosen from 1 choice Sep 12 18:42:01 madre kernel: [ 44.600067] usb 2-1: new full speed USB device using uhci_hcd and address 2 Sep 12 18:42:01 madre kernel: [ 44.776376] usb 2-1: configuration #1 chosen from 1 choice Sep 12 18:42:01 madre kernel: [ 45.019292] usb 3-1: new full speed USB device using uhci_hcd and address 2 Sep 12 18:42:01 madre kernel: [ 45.190550] usb 3-1: configuration #1 chosen from 1 choice Sep 12 18:42:01 madre kernel: [ 45.434531] usb 3-2: new full speed USB device using uhci_hcd and address 3 Sep 12 18:42:01 madre kernel: [ 45.611694] usb 3-2: configuration #1 chosen from 1 choice Sep 12 18:42:01 madre kernel: [ 45.614670] hub 3-2:1.0: USB hub found Sep 12 18:42:01 madre kernel: [ 45.617622] hub 3-2:1.0: 4 ports detected Sep 12 18:42:01 madre kernel: [ 45.958924] usb 3-2.3: new low speed USB device using uhci_hcd and address 4 Sep 12 18:42:01 madre kernel: [ 46.110679] usb 3-2.3: configuration #1 chosen from 1 choice Sep 12 18:42:01 madre kernel: [ 46.123327] usbcore: registered new interface driver hiddev Sep 12 18:42:01 madre kernel: [ 46.146701] input: GreenAsia Inc. USB Joystick as /class/input/input2 Sep 12 18:42:01 madre kernel: [ 46.146707] input: USB HID v1.10 Joystick [GreenAsia Inc. USB Joystick ] on usb-0000:00:10.2-2.3 Sep 12 18:42:01 madre kernel: [ 46.146719] usbcore: registered new interface driver usbhid Sep 12 18:42:01 madre kernel: [ 46.146722] drivers/usb/input/hid-core.c: v2.6:USB HID core driver Sep 12 18:42:01 madre kernel: [ 47.642360] kjournald starting. Commit interval 5 seconds Sep 12 18:42:01 madre kernel: [ 47.642375] EXT3-fs: recovery complete. Sep 12 18:42:01 madre kernel: [ 47.645198] EXT3-fs: mounted filesystem with ordered data mode. Sep 12 18:42:01 madre kernel: [ 55.205778] skge eth0: enabling interface Sep 12 18:42:01 madre kernel: [ 56.363842] NET: Registered protocol family 17 Sep 12 18:42:01 madre kernel: [ 56.889509] skge eth0: Link is up at 100 Mbps, full duplex, flow control none Sep 12 18:42:01 madre kernel: [ 56.919016] Linux agpgart interface v0.102 (c) Dave Jones Sep 12 18:42:01 madre kernel: [ 56.942828] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 12 18:42:01 madre kernel: [ 56.961475] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Sep 12 18:42:01 madre kernel: [ 56.972646] Linux video capture interface: v2.00 Sep 12 18:42:01 madre kernel: [ 57.120076] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16 Sep 12 18:42:01 madre kernel: [ 57.120082] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com Sep 12 18:42:01 madre kernel: [ 57.130625] agpgart: Detected AGP bridge 0 Sep 12 18:42:01 madre kernel: [ 57.133381] agpgart: AGP aperture is 64M @ 0xf4000000 Sep 12 18:42:01 madre kernel: [ 57.593539] bttv: driver version 0.9.16 loaded Sep 12 18:42:01 madre kernel: [ 57.593543] bttv: using 8 buffers with 2080k (520 pages) each for capture Sep 12 18:42:01 madre kernel: [ 57.593584] bttv: Bt8xx card found (0). Sep 12 18:42:01 madre kernel: [ 57.593607] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 21 Sep 12 18:42:01 madre kernel: [ 57.593620] bttv0: Bt878 (rev 17) at 0000:00:0e.0, irq: 21, latency: 64, mmio: 0xfad00000 Sep 12 18:42:01 madre kernel: [ 57.593629] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 Sep 12 18:42:01 madre kernel: [ 57.593631] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] Sep 12 18:42:01 madre kernel: [ 57.594075] bttv0: i2c: checking for MSP34xx @ 0x80... not found Sep 12 18:42:01 madre kernel: [ 57.594761] bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no Sep 12 18:42:01 madre kernel: [ 57.594763] bttv0: using tuner=33 Sep 12 18:42:01 madre kernel: [ 57.594766] bttv0: i2c: checking for MSP34xx @ 0x80... not found Sep 12 18:42:01 madre kernel: [ 57.595447] bttv0: i2c: checking for TDA9875 @ 0xb0... not found Sep 12 18:42:01 madre kernel: [ 57.596148] bttv0: i2c: checking for TDA7432 @ 0x8a... not found Sep 12 18:42:01 madre kernel: [ 57.619473] tuner 1-0043: chip found @ 0x86 (bt878 #0 [sw]) Sep 12 18:42:01 madre kernel: [ 57.619497] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) Sep 12 18:42:01 madre kernel: [ 57.621971] tuner 1-0060: Chip ID is not zero. It is not a TEA5767 Sep 12 18:42:01 madre kernel: [ 57.621973] tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw]) Sep 12 18:42:01 madre kernel: [ 57.624756] tuner 1-0060: microtune: companycode=3cbf part=42 rev=22 Sep 12 18:42:01 madre kernel: [ 57.626190] tuner 1-0060: microtune MT2050 found, OK Sep 12 18:42:01 madre kernel: [ 57.628953] tuner 1-0060: microtune: companycode=3cbf part=42 rev=22 Sep 12 18:42:01 madre kernel: [ 57.630439] tuner 1-0060: microtune MT2050 found, OK Sep 12 18:42:01 madre kernel: [ 57.640967] bttv0: registered device video0 Sep 12 18:42:01 madre kernel: [ 57.641006] bttv0: registered device vbi0 Sep 12 18:42:01 madre kernel: [ 57.641024] bttv0: PLL: 28636363 => 35468950 .. ok Sep 12 18:42:01 madre kernel: [ 57.770856] input: PC Speaker as /class/input/input3 Sep 12 18:42:01 madre kernel: [ 57.841455] Bluetooth: Core ver 2.11 Sep 12 18:42:01 madre kernel: [ 57.841504] NET: Registered protocol family 31 Sep 12 18:42:01 madre kernel: [ 57.841506] Bluetooth: HCI device and connection manager initialized Sep 12 18:42:01 madre kernel: [ 57.841510] Bluetooth: HCI socket layer initialized Sep 12 18:42:01 madre kernel: [ 57.846564] logips2pp: Detected unknown logitech mouse model 127 Sep 12 18:42:01 madre kernel: [ 57.862793] Bluetooth: HCI USB driver ver 2.9 Sep 12 18:42:01 madre kernel: [ 57.916045] parport: PnPBIOS parport detected. Sep 12 18:42:01 madre kernel: [ 57.916085] parport0: PC-style at 0x378, irq 7 [PCSPP] Sep 12 18:42:01 madre kernel: [ 57.955844] usbcore: registered new interface driver hci_usb Sep 12 18:42:01 madre kernel: [ 58.103362] bt878: AUDIO driver version 0.0.0 loaded Sep 12 18:42:01 madre kernel: [ 58.103384] bt878: Bt878 AUDIO function found (0). Sep 12 18:42:01 madre kernel: [ 58.103401] ACPI: PCI Interrupt 0000:00:0e.1[A] -> GSI 19 (level, low) -> IRQ 21 Sep 12 18:42:01 madre kernel: [ 58.103406] bt878_probe: card id=[0x1211bd], Unknown card. Sep 12 18:42:01 madre kernel: [ 58.103407] Exiting.. Sep 12 18:42:01 madre kernel: [ 58.103411] ACPI: PCI interrupt for device 0000:00:0e.1 disabled Sep 12 18:42:01 madre kernel: [ 58.103415] bt878: probe of 0000:00:0e.1 failed with error -22 Sep 12 18:42:01 madre kernel: [ 58.210161] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5xx camera found. (TV8532) Sep 12 18:42:01 madre kernel: [ 58.238656] PCI: Enabling device 0000:00:11.6 (0000 -> 0001) Sep 12 18:42:01 madre kernel: [ 58.238666] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22 Sep 12 18:42:01 madre kernel: [ 58.259610] nvidia: module license 'NVIDIA' taints kernel. Sep 12 18:42:01 madre kernel: [ 58.566917] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input4 Sep 12 18:42:01 madre kernel: [ 58.577583] usbcore: registered new interface driver gspca Sep 12 18:42:01 madre kernel: [ 58.577588] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered Sep 12 18:42:01 madre kernel: [ 58.577595] usbcore: registered new interface driver xpad Sep 12 18:42:01 madre kernel: [ 58.577597] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6 Sep 12 18:42:01 madre kernel: [ 59.504971] ACPI: PCI interrupt for device 0000:00:11.6 disabled Sep 12 18:42:01 madre kernel: [ 59.504980] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 Sep 12 18:42:01 madre kernel: [ 59.505081] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Sep 12 18:42:01 madre kernel: [ 59.505272] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006 Sep 12 18:42:01 madre kernel: [ 59.505735] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 Sep 12 18:42:01 madre kernel: [ 60.169278] fuse init (API version 7.8) Sep 12 18:42:01 madre kernel: [ 60.195348] lp0: using parport0 (interrupt-driven). Sep 12 18:42:01 madre kernel: [ 60.224125] Adding 3028212k swap on /dev/disk/by-uuid/dae3fe70-c74f-46df-8666-722ac60ee6b7. Priority:-1 extents:1 across:3028212k Sep 12 18:42:01 madre kernel: [ 60.360506] EXT3 FS on hda1, internal journal Sep 12 18:42:01 madre kernel: [ 60.452771] NET: Registered protocol family 10 Sep 12 18:42:01 madre kernel: [ 60.452851] lo: Disabled Privacy Extensions Sep 12 18:42:01 madre kernel: [ 63.968011] kjournald starting. Commit interval 5 seconds Sep 12 18:42:01 madre kernel: [ 63.968228] EXT3 FS on hda3, internal journal Sep 12 18:42:01 madre kernel: [ 63.968232] EXT3-fs: mounted filesystem with ordered data mode. Sep 12 18:42:01 madre kernel: [ 63.995041] kjournald starting. Commit interval 5 seconds Sep 12 18:42:01 madre kernel: [ 63.995336] EXT3 FS on sda1, internal journal Sep 12 18:42:01 madre kernel: [ 63.995341] EXT3-fs: mounted filesystem with ordered data mode. Sep 12 18:42:01 madre kernel: [ 70.099898] No dock devices found. Sep 12 18:42:01 madre kernel: [ 70.205655] Using specific hotkey driver Sep 12 18:42:01 madre kernel: [ 70.271193] input: Power Button (FF) as /class/input/input5 Sep 12 18:42:01 madre kernel: [ 70.274374] ACPI: Power Button (FF) [PWRF] Sep 12 18:42:01 madre kernel: [ 70.302366] input: Power Button (CM) as /class/input/input6 Sep 12 18:42:01 madre kernel: [ 70.305493] ACPI: Power Button (CM) [PWRB] Sep 12 18:42:01 madre kernel: [ 70.333054] input: Sleep Button (CM) as /class/input/input7 Sep 12 18:42:01 madre kernel: [ 70.336192] ACPI: Sleep Button (CM) [SLPB] Sep 12 18:42:01 madre kernel: [ 70.382157] pcc_acpi: loading... Sep 12 18:42:01 madre kernel: [ 70.579921] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) Sep 12 18:42:03 madre dhcdbd: Started up. Sep 12 18:42:03 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason Sep 12 18:42:03 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason Sep 12 18:42:04 madre kernel: [ 73.352791] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. Sep 12 18:42:04 madre kernel: [ 73.353033] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode Sep 12 18:42:04 madre kernel: [ 73.353244] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode Sep 12 18:42:05 madre kernel: [ 74.220945] ppdev: user-space parallel port driver Sep 12 18:42:05 madre hpiod: 1.7.3 accepting connections at 2208... Sep 12 18:42:05 madre kernel: [ 74.876676] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Sep 12 18:42:05 madre kernel: [ 74.876681] apm: overridden by ACPI. Sep 12 18:42:05 madre kernel: [ 75.037123] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Sep 12 18:42:05 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name Sep 12 18:42:05 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.domain_name Sep 12 18:42:05 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain Sep 12 18:42:05 madre dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers Sep 12 18:42:05 madre kernel: [ 75.126201] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Sep 12 18:42:05 madre kernel: [ 75.140771] NFSD: starting 90-second grace period Sep 12 18:42:09 madre kernel: [ 76.931851] Bluetooth: L2CAP ver 2.8 Sep 12 18:42:09 madre kernel: [ 76.931855] Bluetooth: L2CAP socket layer initialized Sep 12 18:42:09 madre kernel: [ 77.314044] Bluetooth: RFCOMM socket layer initialized Sep 12 18:42:09 madre kernel: [ 77.314057] Bluetooth: RFCOMM TTY layer initialized Sep 12 18:42:09 madre kernel: [ 77.314059] Bluetooth: RFCOMM ver 1.8 Sep 12 18:42:17 madre gconfd (naragol-5849): comenzando (versión 2.18.0.1), pid 5849 usuario «naragol» Sep 12 18:42:17 madre gconfd (naragol-5849): Se resolvió la dirección «xml:readonly:/etc/gconf/gconf.xml.mandatory» a una fuente de configuración de sólo lectura en la posición 0 Sep 12 18:42:17 madre gconfd (naragol-5849): Se resolvió la dirección «xml:readwrite:/home/naragol/.gconf» a una fuente de configuración escribible en la posición 1 Sep 12 18:42:17 madre gconfd (naragol-5849): Se resolvió la dirección «xml:readonly:/etc/gconf/gconf.xml.defaults» a una fuente de configuración de sólo lectura en la posición 2 Sep 12 18:42:17 madre gconfd (naragol-5849): Se resolvió la dirección «xml:readonly:/var/lib/gconf/debian.defaults» a una fuente de configuración de sólo lectura en la posición 3 Sep 12 18:42:17 madre gconfd (naragol-5849): Se resolvió la dirección «xml:readonly:/var/lib/gconf/defaults» a una fuente de configuración de sólo lectura en la posición 4 Sep 12 18:42:23 madre gconfd (naragol-5849): Se resolvió la dirección «xml:readwrite:/home/naragol/.gconf» a una fuente de configuración escribible en la posición 0 Sep 12 18:42:52 madre gconfd (naragol-5849): Failed to send buffer , ahora veo que el mensaje "failed to send buffer" aparece al final del arranque, que no justo antes del cuelge. Y en esta ocasion no veo mencion a driver de Nvidia en los mensajes de arranque. De hecho el unico mensaje justo antes del cuelge es "MARK" o sea, que no hay mensaje ninguno y se cuelga sin mas. Ya me estoy temiendo que sea algo de hardware , aunque un calenton no puede ser...Editado por logaran en 12-sep-2007 a las 19:50. |
|
|
12-sep-2007, 19:48
|
#12 |
|
Marciano
|
Lo de gconfd, creo que no tiene nada que ver con tu cuelge del sistema.
Referente a lo de nvidia, que version es de Ubuntu?, que kernel? Hay problemas con los drivers de nvidia , prueba de reinstalar-los de forma manual, sigue los pasos de esta referencia: http://www.ubuntuparatodos.org/?q=node/169 Referente al cuelgue, parece ser algo de hardware, desde cuando te pasa? que has cambiado desde entonces? |
|
12-sep-2007, 19:59
|
#13 |
|
Marciano
|
Mi Ubuntu es la version 7.04 y el Kernel el 2.6.20 Generic.
Los drivers que utilizo son los libres nv, los que instala el sistema por defecto desde el administrador de "Controladore Restringidos". Estube usando un tiempo los drivers oficiales pero era un coñazo reistalar cada vez que se actualizaba el Kernel (cosa mas comun de lo que yo creia) Me viene pasando desde hace unas 3 semanas, y no he instalado nada nuevo. Estoy por instalar otro SO y ver que pasa, quizas volver a Dapper o Instalar un windows que tengo por ahi y rularlo un tiempo a ver que tal... |
|
13-sep-2007, 19:09
|
#14 | |
|
Marciano
|
Quote:
Hay que ser fuerte...no caigas en la trampa de que en windows ya lo sabes hacer................. Yo aun estoy con la 6.10 y no lo cambio.... Ya sabes que hay infinitas linux...para volver a windows ahora..... Editado por sebastia2000 en 13-sep-2007 a las 20:42. |
|
|
13-sep-2007, 20:11
|
#15 |
|
Marciano
|
Que hay?
Logaran,yo no soy un experto ni mucho menos,no hace mucho que empeze con ubuntu...pero por decir algo.. Has probado a echarle un ojo al etc/fstab??( $ sudo gedit /etc/fstab ) Segun el log que has posteao,todo tiene pinta de ir bien hasta que "instala" el knfsd..eso del bluetooth creo que te esta echando algo pa atras.. saludos. Editado por Zeta_Bros en 13-sep-2007 a las 20:16. |
|
13-sep-2007, 21:13
|
#16 |
|
Administrador
|
Logaran, si tienes que poner una "parrafada" en el post por favor hazlo entre [ CODE] y [ /CODE] en lugar de usar [ QUOTE] y [/quote] que si no el post se hace larguisimo... asi como te lo he dejado..
 |
|
13-sep-2007, 21:36
|
#17 | |||
|
Marciano
|
Quote:
La verdad es que la idea de probar un Windows no es por que con ese SO podre localizar el problema. Sino porque de ese modo confirmo o descarto un fallo de Hardware intermitente (los coñazos vamos) si con Windos se me congelara casi seguro que es la placa o alguna tarjeta averiada Aun así, seguire tu consejo y no volvere a acercarme al lado oscuro Quote:
Quote:
 EDITO: He pasado la tarde haciendo pruebas y parece que se confirma que es cosa de la grafica. He puesto el micro al 100% con CPUBURN durante un buen rato y no ha pasado de los 52 grados, y no se ha colgado claro. Me llevo la tarde entera googleando y marcianeando y ¡nada! no se cuelga. Se tira dias encendido con la mula a tope y ¡nada!. Sin embargo, como ponga una peli, o arranque un juego, aunque sea tan simple como el Frets On Fire, en cuestion de minutos se congela. Mañana le metere una grafica viejuna que tengo por casa y vere que tal va la cosa. Editado por logaran en 14-sep-2007 a las 01:33. |
|||
|
14-sep-2007, 09:59
|
#18 | |
|
Marciano
|
Quote:
En fstab estan los puntos de montaje tales como unidades de disco, memoria swap, nfs, cdroms, proc Cierto es que una manera de optimizar tu linux es desactivar los servicios que no se usan como por ejemplo: bluetooth: Tiene tu placa base este dispositivo. apmd: Seguro que usas acpi. laptop-mode: Es un equipo de sobremesa o un portatil?¿ pcmciautils: Si es un equipo de sobremesa no creo que tenga ranuras PCMCIA wpa-ifupdown y wpasupplicant: Tienes tarjeta de red inalambrica?¿. ppp-dns: No creo que uses el modem para conectarte a internet. rsync: Desactivalo a no ser que hagas espejos o copias de seguridad sincronizando ficheros. Para desactivarlos de manera bruta, les quitas el permiso de execucion: ej: "chmod -x ppp-dns" o lo que es lo mismo "chmod 644 ppp-dns" Sino de manera mas fina, en el menu de KDE --> sistema --> servicios Tambien puedes desinstalarlos pro completo desde el "Synaptic" Si tal y como dices, crees que es problema de la tarjeta grafica ya te dije mas arriba que actualizases el driver de nvidia ya que el que se instala con la instalacion de Ubuntu da problemas con los kernels mas nuevos. Tienes que actualizarlo a la version 100.14.09 y despues a la 100.14.11 Sigue el mini tutorial de esta fuente: http://www.ubuntuparatodos.org/?q=node/169 Hazlo y prueba a ver que tal responde. Yo no tuve mas remedio ya que uso 2 monitores y al actualizar el kernel no me arrancaban las X por culpa del modulo nvidia |
|
